Important Considerations for Pipes and Fittings of Water Treatment Systems

With an increasing focus on the proper use of water resources, treatment of wastewater for introducing back in the loop is being explored as an option. Wastewater treatment is an important aspect of water conservation and where these systems are installed, they can serve as a means for meeting the water requirements for different applications by offsetting the dependence on freshwater. The installation of a wastewater treatment system also requires the installation of a pipeline with all components in place for efficient functionality. Let us take a look at some of the important considerations for pipes and fittings to be installed in water treatment systems:
1. Choose the right pipes and fittings for installing the water treatment systems. For wastewater treatment, it is important that the water pipe fittings and pipes are of the highest quality and can withstand the corrosion from the chemicals and corrosive agents which may be present in the wastewater. In such a case, plastic pipes are a suitable choice as they show high resistance to corrosion with higher durability.

2. During the installation of water treatment systems, pressure considerations are an important aspect of the installation. The pipes and water pipe connector systems must be installed such that any pressure drops are accounted for in order to ensure optimal functionality. Again, plastic pipe systems are an apt choice for such systems as they can withstand pressure variations.

3. The fixed equipment such as tanks and drums which are used in the water treatment system must also be equipped with the proper water pipes and fittings to account for stresses in the system. Loads must be taken into account to prevent much movement of the pipeline and proper bracketing must be done to prevent them.

4. Only the minimum number of flanges must be installed in the pipeline for a water treatment system to prevent leakages. The more the flanges, the greater the risk of leaks and as a general rule of thumb, they must be used only where it is absolutely necessary.

When you want the best quality plastic pipes and fittings for water treatment systems and other water supply and management applications, choose from the comprehensive range of solutions offered by Wavin, the leading global manufacturer of sustainable plastic pipes and fittings.

Comments

Post a Comment

Popular posts from this blog

Why Plastic Pipes and Fittings Are Ideal for Water Treatment Systems

Image
Access to safe and clean water is still limited to a small percentage of the global population. The available water resources have a significant amount of contaminants in them, organic and inorganic, which must be filtered out to make the water fit for use and consumption. It is here that water treatment systems play an important role. The water treatment system not only filters raw water but also recycles used water to render it fit for reuse. Plastic pipes and fittings are widely being used in water supply and management systems such as water treatment pipelines. Read on to know about the various properties of plastic water pipes and fittings that make them a suitable choice for water treatment systems:
Read more

Wavin’s Innovative Tigris Water Pipe Fittings

When it comes to the installation of water pipe connections, one of the best choices that you can make is plastic fittings. Ideal for joining a wide variety of plastic pipes and tubes, plastic fittings are known to be extremely resistant to corrosion, can withstand action of pressure, and are extremely strong and durable. Moreover, these are extremely lightweight and easy to transport and install, thereby making them extremely cost effective when being installed in pipe networks. There are different types of plastic fittings available which serve different functions. Let us take a look at some of these types: 1.    Tee Joints: One of the most common types of plastic water pipe fittings are the tee joints. These are, as the name suggests, shaped as the alphabet ‘T’ and are used to either divert a single line into two lines or connect two separate lines into a single line. Tees can have socket or threaded ends. 2.     Crosses: If one wants to connect four dif...
Read more